Marine Cable

Salt-Resistant
Marine Cables

Built by Elegar Kerpen for ships, offshore units, and dockside installations, where moisture, salt, heat, and vibration are constant.

Let's Connect View Specifications
Multicore braid-armoured marine cable cross-section
Braid-Armoured Marine Cable · SHF 2 Sheath / EPR Cores

Disclaimer: Cross-section shown is a representative illustration; actual product construction and dimensions may vary.

1.1kV
Max Voltage Grade
–40°C to +90°C
Operating Temperature
100%
Tinned Copper Conductor
2 Standards
IEC · BS Compliant
Shipboard power and control systems on a modern vessel's control deck
About this product

Global Marine Cables

At Elegar Kerpen, one of the most trusted wires and cables manufacturers in India, our marine cables are engineered for the conditions that define life at sea. Built with corrosion-resistant tinned copper conductors, high-grade EPR or XLPE insulation, and SHF 1 / SHF 2 halogen-free sheathing, the range is suited to shipboard power circuits, marine control cables, and communication systems across ships, offshore units, and dockside installations.

What a marine cable does
Marine cable is built for reliable performance in ships, offshore units, and other wet or high-salinity environments. It is made to handle moisture, saltwater, heat, vibration, and mechanical stress while keeping power and signal flow stable, which is what gives it a long service life in conditions where standard cable would degrade.
Use cases

Applications of Marine Cable

Marine cables from Elegar Kerpen are designed for dependable power, control, and communication across vessels, offshore platforms, and shoreside marine infrastructure.

01
Shipboard Power & Control Systems
Widely used for power distribution and control wiring on ships. It helps keep electrical systems stable even in areas exposed to vibration, salt, and continuous movement.
02
Offshore & Dockside Installations
Supports electrical work on offshore platforms, ports, and nearby marine structures. The build helps reduce the impact of moisture, corrosion, and changing weather conditions.
03
Bi-Directional Communication Networks
Used for bi-directional communication between field devices and control systems in refining, petrochemicals, power generation, food & beverage, pharmaceuticals, and nuclear applications where reliable data transfer is critical.
04
Automation & Monitoring Equipment
Suitable for automation panels, sensors, and monitoring units used in marine and industrial environments. It supports smooth signal transmission and steady performance in demanding conditions.
05
Engine Room & Switchboard Wiring
Routed through machinery spaces and main switchboards where heat, oil mist, and constant vibration are part of daily operation, with sheathing chosen to resist all three.
06
Navigation & Communication Systems
Connects radar, GPS, VHF, and internal communication equipment on the bridge. Screened constructions keep signals clean alongside high-current power runs.
07
Deck Machinery & Winches
Feeds cranes, windlasses, mooring winches, and hatch covers on exposed decks, where UV, spray, and repeated flexing are unavoidable.
08
Port & Terminal Infrastructure
Used across quayside cranes, shore-power connections, and terminal lighting, where high-salinity air accelerates corrosion in ordinary cable.
Technical data

Marine Cable Construction

Full construction parameters available in our comprehensive product catalogue. Custom sizes on request from our applications engineering team.

Marine Cable Construction Parameters
ConductorTinned Copper (corrosion resistant), Stranded or Flexible
InsulationEPR (Ethylene Propylene Rubber) / XLPE
Collective ScreeningTinned Copper Braid or Al-mylar Tape with Tinned Copper Drain Wire
Inner SheathSHF 1 / SHF 2
ArmouringTinned Copper Wire Braid / Galvanised Steel Wire Braid
Outer SheathSHF 1 / SHF 2
Voltage GradeUp to 1.1 kV
Operating Temperature–40°C to +90°C (typical)
Flame RetardanceIEC 60332-1 (single cable) / IEC 60332-3 Cat. A (bunched)
Standards ComplianceIEC 60092, BS 7917
Compliance

Marine Cable Standards

IEC 60092
Shipboard Electrical Installations
BS 7917
Elastomer Insulated, Ships & Offshore
IEC 60332-3
Flame Propagation, Test Method
IEC 60754
Halogen Acid Gas, Test Method
IEC 61034
Smoke Density, Test Method
Product enhancements

Additional Properties

The cable can be manufactured with:

Mud Resistance and Sea-Water Immersion Resistance
Anti-Termite and Anti-Rodent Properties
UV & Ozone Resistance (As per ASTM G 154 & 155, ISO 4892-2 Method A, UL 1581)
Acid, Alkali, Sulphur & Oil Resistance (as per IEC 60881-404)
Operating Temperature Rating ranging from -40°C to +105°C
MICA for Fire Survival / Resistance properties up to 950°C
Water Resistance / Water Blocking Tape
RoHS & REACH compliance
Product advantages

Why Elegar Kerpen Marine Cables?

Eight measurable advantages built into every cable, from manufacturing floor to shipyard installation.

Saltwater & Corrosion Resistance
Tinned copper conductors and sea-water-resistant sheathing hold up in high-salinity air and direct spray, where bare copper would corrode.
Low Smoke Emission
Minimises hazardous smoke below decks and in engine rooms, keeping escape routes usable and reducing damage to nearby equipment.
Fire Resistant
Continues to function under fire conditions, maintaining critical shipboard systems when it matters most.
Zero Halogen
Free from halogen compounds, reducing toxic and corrosive gas release in the enclosed compartments typical of vessels and offshore units.
Vibration & Flex Tolerant
Stranded and flexible conductor options absorb continuous engine and sea-state vibration without work-hardening or core fracture.
Long Service Life
Wear-resistant, non-corrosive materials for extended operational life with minimal maintenance between dry-dockings.
Compact & Easy to Route
Flexible construction and a tight bend radius make installation practical in the confined cable runs and trunking found on ships.
Wide Voltage Range
Available up to 1.1 kV, covering shipboard lighting, control circuits, and main power distribution.
Support FAQ

Frequently Asked Questions

Find answers to frequently asked questions related to Marine Cable.

What is marine cable used for?
Marine cable is used in ships, offshore systems, and marine equipment. It carries power and signals safely in wet, salty, and vibration-prone conditions.
What makes marine cable different from regular cable?
Marine electrical cable has stronger insulation, better moisture resistance, and improved protection against corrosion. It is made for tougher environments than standard cables.
Can marine cable be used for control applications?
Yes. Marine control cables are used for control panels, automation, and signal circuits. They help maintain stable operation in marine and industrial setups.
Is marine cable suitable for outdoor use?
Yes, it is suitable for outdoor marine use because it can resist UV, ozone, saltwater, and weather exposure. That makes it dependable in open and exposed areas.
How do I choose the right marine cable?
Check voltage, application, insulation type, and marine electrical cable specifications before selection. The right cable depends on the system it will support and the environment it will face.
Does Elegar Kerpen supply marine cables in India?
Elegar Kerpen supports buyers looking for marine cable manufacturers in India and marine electrical cable suppliers. The range is designed for marine and offshore requirements.
Cables & Wires

Other Products